Aug 202016
 

Cool Neon EL Wire

  • We know you have been wondering whether there is still time to order some bright lights for the Playa.
  • YES, you can!
  • We’ll be shipping all orders received through 11:59 pmFriday, August 26th.
  • For off-the-shelf items (i.e. not custom soldering), we ship most orders the same day or the next at the latest.
  • For addresses east of Nevada, USPS Priority Mail (for $9) can get to almost everywhere in the country in two days.
  • Or you can always choose FedEx Overnight, 2-day or 3-day express shipping too.
  • For more information about shipping, click HERE.

Fun Ways To Stay Illuminated On The Playa!

Pocket Plasma.  A disc of plasma light that reacts to music
Rainbow Tassles.  A burst of all 10 of our High Bright and Hella Phat colors
Fuze Necklaces.  Polished quartz necklaces that radiate a spectrum of light
Cool Neon Sunglasses
Look at all of our Instant Gratification items for Cool Neon EL wire that’s ready to wear, including our 5ft plug and play unit, 10ft and 20ft options.
For more advanced costumes, our Total Control Lighting paired with a Gateway Controller.

And we have some fun and interesting items you have never seen before, check them out HERE

Rainbow Tassles will need a driver.  We suggest the AA Handheld.

Pocket Plasmas, drivers, and Plug & Play kits will need batteries.

If you’d like some soldering help, project advice, or extra time to shop, Cool Neon will be having it’s last Soldering Party in our Oakland shop on Saturday August 22 at 1433 Mandela Pkwy, Oakland, CA.

For inspiration to make your own costumes, you can take a look at:

A great tutorial about how use Cool Neon Total Control Lighting in a costume!

Cool Neon Electroluminescent Wire and Leather Necklace (with Instructable)

How to make a Stickman Costume

Doodle Dudes

Anthrolume

A Costume Going to the Playa in 2012

Check out our Tutorials for more technical info.

See you on the playa!

Benny, Gian and the Elves

Jul 102015
 

Electroluminescent Wire CostumeCool Neon Electroluminescent Wire Costumes

Darryl Thomas of the Western Oregon University Dept. of Theater and Dance, Rainbow Dance Theatre, sent us these fabulous videos of his dance “The Owl and The Serpent”. Here is his description of his work:

It is a dance allegory loosely based on the story of Adam and Eve in the Garden of Eden.  The dance is approximately 25 minutes in length.  It features Cool Neon’s electroluminescent wire,  2.6mm high bright wire.  Each costume is actually two costumes in one (e.g. an owl & serpent, man & serpent, woman & owl).
I control the costumes using two, six circuit wireless controllers that I had designed and built for this dance. The specific circuit that is activated determines which costume is visible.  Each of the 12 circuits (per costume) is programmed on a timeline with the music.   Each costume has approximately 250′ – 300′ of 2.6mm high bright wire and is powered by a single 12 volt battery pack with approximately 12 blue fish drivers. Additionally there are props (bats, flowers, snake, etc.) and a full stage set element (tree branch with fruit) that are all controlled via the same wireless device and their on/off sequence is also programmed on a time line with the costumes.

Here is a five minute version of the dance:

The Owl & The Serpent from Darryl Thomas on Vimeo.

Rainbow Dance Theatre

Here is the entire 25 minute dance:

“The Owl & Serpent” Live Performance from Darryl Thomas on Vimeo.

Darryl  will be performing “The Owl & the Serpent” again in September, and we will let you know when and where just in case you live in the Pacific Northwest.

Daryl, we love it when you send us your work, and we love sharing it with our readers, thank you so much.

Benny, Karen and the Elves

Apr 292015
 
cool neon maker faire  MACome See Us, Saturday & Sunday, May 16th and 17th

Well of course we are going to be at the Maker Faire again this year, because that is who you are, Makers.
So come on out to see us!

Maker Faire is a full-blown community fair that celebrates making, invention and creativity.  This family-friendly event brings together science, art, craft, homesteading and engineering plus music, food, workshops, and performance, and showcases the amazing work of makers across the San Francisco Bay and beyond.

MF15_Map_8x11Look for us next to our LITEWALL (See photo above) in Fiesta Hall’s Dark Room in Zone 3 (see map above).

And we are excited to tell you that Benny once again is going to be a presenter at the Maker Faire.

Benny Presenting at the Maker Faire 2013

Benny Presenting at the Maker Faire 2013

Benny’s Presentation:
Technology of Total Control Lighting LEDs
When: Saturday, May 16th 5PM
Where: San Mateo County Events Center, C – Electronics Stage

You are not going to want to miss any of it.

When:  Saturday & Sunday, May 16th and 17th
Where: San Mateo County Events Center, CA

Saturday 10am – 8pm
Sunday 10am – 6pm

Buy Your Tickets Here
Get Tickets to Maker Faire Today!

We look forward to seeing you there!
Benny, Karen and the Elves